A Cosmetic Product Safety Report is often treated as a one-off purchase: commission it, file it, launch the product. In law it is a living document. The moment your formula, fragrance, supplier, packaging or label moves on, the report describing the product can fall out of date, and an out of date report is not a valid safety assessment of the product you are actually selling. A CPSR revision is how you bring the report back in line without starting from zero.
This guide explains when a CPSR has to be revised, which changes are minor administrative updates and which ones go back to the safety assessor for a fresh look, what happens to your CPNP notification and product information file along the way, and why a revision is only possible on a report the same assessor prepared.
Key takeaways
- A CPSR must describe the product as it is placed on the market today. If the product changes, the report has to change with it.
- Minor changes such as a new product name, company name, address or brand details do not affect safety and need an administrative update.
- Major changes such as a new formula, a different fragrance or new test results need the safety assessor to re-evaluate the product.
- Regulatory amendments to the annexes, IFRA updates and new undesirable effect data can make a revision necessary even if you change nothing.
- A revision is not a separate report. Some changes are large enough that a new CPSR is the right answer.
- Only the assessor who signed the report can revise it. A CPSR signed by another assessor needs a new assessment, not an edit.
- A revised CPSR usually means updating the PIF and the CPNP notification as well.
Why a CPSR goes out of date
Article 10 of Regulation (EC) No 1223/2009 requires every cosmetic product to undergo a safety assessment before it is placed on the market, documented as a CPSR in line with Annex I. Article 11 requires that report to sit in the product information file, which the Responsible Person keeps available to authorities for ten years after the last batch is placed on the market. The Commission guidelines on Annex I, published as Implementing Decision 2013/674/EU, are explicit that the safety report should be kept up to date as relevant new information becomes available.
The logic is straightforward. Part A of the CPSR records the exact quantitative formula, the specifications of the raw materials, the packaging, the exposure calculations and the toxicological data. Part B is the assessor’s signed conclusion based on that data. If any of the inputs change, the conclusion no longer rests on the facts. If you need a refresher on how the two parts fit together, read the CPSR explained.
Minor and major changes
Not every change carries the same weight. The practical test is simple: does the change affect what the consumer is exposed to, or how safely the product performs? If not, it is administrative. If it does, the assessor has to look at the safety case again.
| Change | Type | What the revision involves |
|---|---|---|
| Product name or trade name | Minor | Update the product identification in the report and keep the safety conclusion unchanged |
| Company name, address or brand details | Minor | Update the administrative details so the report matches the label and the CPNP record |
| Change in ingredient percentages | Major | Recalculate exposure and margins of safety for affected ingredients |
| New or removed ingredient | Major | Assess the new ingredient’s toxicology, impurities and annex status |
| Different fragrance or fragrance supplier | Major | Review the IFRA certificate, allergen content and labelling against the new composition |
| New stability, challenge or other test results | Major | Review the results and update the shelf life, PAO or microbiological conclusions |
| Change of packaging material | Usually major | Review compatibility and migration data for the new contact material |
The boundary is not always obvious. A name change that comes with a new claim, such as relaunching a body lotion as a baby lotion, changes the target population and therefore the exposure assumptions. That is a major change dressed up as a minor one, and it may need a new assessment altogether.
Minor changes in practice
Rebrands, company restructures, a move of registered office or a new brand name are the most common minor revisions. Nothing about the product’s safety changes, but the report has to match the label and the CPNP notification exactly. An inspector comparing a label that says one company with a CPSR that names another will treat the mismatch as a gap in the file, even though the product is identical.
Major changes in practice
Formula changes are the obvious case, but the subtle ones cause more trouble: switching a raw material supplier for an ingredient with the same INCI name, for example, can change the impurity profile or the specification, which the CPSR records. Fragrance reformulations by the fragrance house, often prompted by an IFRA amendment, change the allergen content and can change the label. Our guide to margin of safety in cosmetics shows why even a small change in concentration can move a calculation.

Changes you did not make
Some revisions are triggered from outside the business. These are easy to miss because nothing in your own product has changed.
- Annex amendments. When the Commission restricts or bans an ingredient, every CPSR that relies on the old limit needs checking. The recent retinol and arbutin limits are a good example, covered in our guide to retinol limits in the EU.
- Labelling changes. The expanded fragrance allergen list under Regulation (EU) 2023/1545 changes what must be declared, and the CPSR should reflect the labelling the product actually carries. See the new fragrance allergen rules.
- New scientific opinions. An SCCS opinion lowering a safe concentration can undermine an existing margin of safety before the law is formally amended.
- Undesirable effects. Annex I requires the report to cover existing data on undesirable effects and serious undesirable effects. A pattern of complaints after launch is new information the assessor needs to consider.
A monitoring routine that ties regulatory change back to your product range is the only reliable way to catch these. Our overview of EU cosmetic regulation updates sets out where these changes come from and how much notice each one gives.
Keep the old version. A revised CPSR replaces the previous one for products made after the change, but batches already on the market were made under the earlier report. Keep each version in the PIF, dated and numbered, so you can show which report covered which batches.
Revision or a new CPSR?
A revision works when the product is recognisably the same product with a defined change. When the change is extensive enough that most of Part A would be rewritten, a new report is cleaner and cheaper in the long run. Typical signs that you need a new CPSR rather than a revision:
- The base formula has changed, not just one or two ingredients.
- The product type or application area has changed, for example a leave-on product becoming a rinse-off one, or a face product extended to the eye area.
- The target population has changed, for example a product now aimed at children under three.
- You are launching a variant alongside the original rather than replacing it. Our guide on when variants need a separate CPSR covers this case.
Why only the original assessor can revise a CPSR
Part B of the CPSR is a personal professional judgement. The safety assessor, who must hold the qualifications set out in Article 10(2), signs it and takes responsibility for the conclusion. A revision edits that judgement, so it can only be made by the assessor who made it, with full access to the data they relied on.
A different assessor cannot simply amend another assessor’s signed report. They did not see the original raw material data, may not agree with the original reasoning, and cannot put their signature to conclusions they did not reach. If your current CPSR was prepared by someone else and you can no longer use them, the correct route is a new safety assessment by the new assessor. Our article on who can sign a CPSR explains the qualification rules behind this.
Do not edit a CPSR yourself. Changing the formula table, the product name or the company details in a signed report without the assessor’s involvement produces a document the assessor never approved. If an authority asks the assessor to confirm it, the file falls apart, and the Responsible Person carries the consequences.
What else to update after a revision
A CPSR revision rarely travels alone. Once the report changes, check the documents that depend on it.
The product information file
Add the revised CPSR, keep the previous version, and update any other PIF elements that changed, such as the product description, the manufacturing method or the proof of claimed effects. See PIF preparation for what the file has to contain.
The CPNP notification
If the notified information has changed, for example the product name, the Responsible Person’s details, the frame formulation or the presence of nanomaterials or CMR substances, the CPNP notification has to be updated as well. Our step by step CPNP guide walks through the portal.
The label
A formula change usually means a new INCI list and may change warnings, allergen declarations or the PAO. The label, the CPSR and the CPNP record should all describe the same product on the same day.
Bringing it all together
A CPSR is valid for the product it describes, and only for as long as it describes it. Name, address and brand changes are quick administrative updates. Formula, fragrance, supplier and test result changes send the report back to the assessor. Regulatory amendments and new safety data can require a revision even when the product has not changed at all.
The simplest discipline is to treat every product change as a question for the safety file: does the CPSR still describe this product? If the answer is no, revise it before the changed batches reach the market, keep the old version for the batches already sold, and bring the PIF, the CPNP notification and the label into line at the same time.
If Lexora prepared your CPSR, we can revise it for either kind of change. Order a CPSR revision and tell us what changed. If your report came from another assessor, or the product has changed too much for a revision, start a new Cosmetic Product Safety Report, and keep the range current with regulatory monitoring and consultancy.
Frequently asked questions
Does a CPSR expire?
No, a CPSR has no fixed expiry date. It stays valid for as long as it accurately describes the product on the market and the current law. A change to the product, its raw materials, its labelling or the regulatory limits it relies on can make it out of date, at which point it needs a revision or a new assessment.
Do I need a new CPSR if I change the product name?
Usually not. A name change with no effect on safety is a minor revision: the assessor updates the product identification and the conclusion stays the same. The exception is a name change that also changes the intended use or target group, such as relaunching a product for babies, which needs a fresh safety assessment.
What counts as a major change to a cosmetic product?
Any change that can affect consumer exposure or product safety. That includes changes to ingredient percentages, adding or removing an ingredient, a new fragrance or fragrance supplier, a change of raw material supplier or specification, new packaging material and new stability, challenge or other test results.
Can another safety assessor revise my existing CPSR?
No. The signed conclusion in Part B is the original assessor’s professional judgement and cannot be amended by someone else. If you change assessor, the new assessor carries out a new safety assessment and issues a new CPSR under their own signature.
Do I have to update my CPNP notification after a CPSR revision?
If the information you notified has changed, yes. A new product name, new Responsible Person details, a different frame formulation or the addition of a nanomaterial or CMR substance all need to be reflected in the CPNP. A purely internal change that does not alter notified data may not require an update.
Should I keep the old version of the CPSR?
Yes. Batches already on the market were made under the earlier report, and the product information file must be available for ten years after the last batch is placed on the market. Keep every version dated and numbered so you can show which report applied to which batches.
